Your shopping cart is empty!
R1 Brushless Motor Lab, LLC.
DC1 Laydown Idler Gear. This fits in the b6.3 laydown transmission.
The Black Anodized Aluminum Front Axle set is light weight which offers less rotating mass for your DC1. This allows for a more efficient drivetrain!...
This Aluminum Diff Case is based upon the B6.3 gear diff. This case uses the same internals/ gaskets as the Associated Gear Diff. WARNING: This...
These new R1 injection molded suspension arms are sold as a pair for the DC1 drag car.
Left rear arm: 990131
Right rear arm: 990132
These are new injection molded R1 Front Suspension arms for the DC1 drag car.
These are the new tuned front arms for our DC1. We have machined out pockets in the arms to reduce weight but maintain rigidity. Each...
Our DC1 D-Block Was Designed To Take The Slop Out Of The Rear Arms. Using A Set Screw You Can Tighten Down On The Pills,...
These are our new tuned arms for the DC1. They are 3 grams lighter per arm.
DC1 Idler Gear Pin, fits on the DC1 Standup Transmission and the b6.3 laydown/layback transmission. WARNING: This product contains a chemical known to the State...
This DC1 Slipper Eliminator works with both the Lay-down and Standup Transmission. This works best with our R1 Spur Gears. THIS IS FOR THE HOLLOW...
These gold anodized cross pins are for the gear diff in the DC1 Drag Car.
Sold in a set of 2
These are the rear hubs for the DC1. This set includes 2 pairs on the inserts. 1 pair of the A,C insert and 1 pair...
These are the kit hinge pins for our DC1. This full set are made of steel.
These are the kit outdrives for the DC1. Sold as a pair. Pins included
This is the differential seals that we use for our DC1 car.
This is our new Wide C-Block for the DC1. Using this block allows you to achieve a 0* toe in the rear.
These are an option part for the DC1.
This hex set is 8mm
This is the gear diff rebuild kit that we use for our DC1 car.
This is an upgrade from the standard hinge pins for the B6.3 All Pins are titanium and the rear outside pins are titanium nitride coated...
CNC Aluminum C-Block Designed For The DC1 Stand Up Transmission Case. This C-Block Will Accept AE Pills. This C-Block Was Designed For Our Transmission Case,...
This is the Black Anodized Aluminum Rear Hex set. This weight saving option allows for a more efficient drivetrain on your DC1 Drag Car! These...
These are sold as a pack of 10
DC1 Slipper Eliminator Spacer Set. This set includes two spacers 1.5mm and 3.0mm. These are used behind the slipper eliminator/spur gear to space out the...
This is our new DC1 Slipper Eliminator. This new part has been designed and machined in house to achieve the tightest possible tolerances. Due to the...
This hex set is an option part for the DC1.
This set is 10mm
These are sold as a pair.
DC1 Titanium Nitride Coated Rear Axel for Drag Car. Compatible with Associated B6 platforms Sold as a Pair. OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR RACES,...
This is a complete set of Hex Nuts for the DC1. Nuts are also compatible with all associated platforms. There are 17 total nuts in...
Titanium nitride coated, titanium CVA barrel used for Team Associated vehicles. Features and Specifications: Lower rotating mass and reduction in semi-sprung weight for improved acceleration...
Lightweight titanium outer rear hinge pins for DC1 drag car and Team Associated vehicles. Features and Specifications: Reduced semi-sprung weight, leading to improved traction and grip:...
This is our new CVA kit for the DC1 drag car, these 69mm shafts are paired with our brand new light weight axle and barrels....
These are replacement shafts for the DC1 CVA v3 kit. This a newly designed CVA Shaft with a proprietary barrel and pin setup. These will...
ITEM# 020141 This shim set is designed for the R1 V21-S motor and all associated rotors. Includes 5pcs T=0.1 5x3.25 Shims, (0.4mm) shims if addition shimming...
DC1 Stand-Up Idler Gear. This gear fits the DC1 Standup Transmission.
ITEM# 020142 This shim set is designed for the R1 V21-S motor and all associated rotors. Includes 5pcs T=0.2 5x3.25 Shims, (0.4mm) shims if addition shimming...
ITEM# 020143 This shim set is designed for the R1 V21-S motor and all associated rotors. Includes 5pcs T=0.3 5x3.25 Shims, (0.4mm) shims if addition shimming...
Lightweight Titanium M2.5 x 8mm screws. These are sold as a set of 4. Available in Purple or Gold Features and Specifications: Lower rotating mass...
DC1 Wheel Nut Set, This set includes 4 Wheel nuts.
DC1 Rear Hub Pills, Sold as a set of 4 with both offsets in the bag.
DC1 v3 Lightweight rear axle. These are new Lightweight Rear axles for the DC1. *Please note that all v3 axles, barrels , shafts and...