DC1 Chassis Parts
Injection Molded Flip Front Servo Mount For DC1 Drag Conversions. OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR RACES, NATIONALS, REEDY RACES, DRAG RACES: (KOTS -...
$5.80
This is our flagship product, the DC1 Drag Car is a top of the line race car! This kit has been tested and proven on...
$590.00
Stackable Brass Weights Designed To Fit On Any Of Our DC1 Bumpers. Weighing In Just Shy Of 34 Grams, These CNC Machined Brass Pieces Will Add More Weight...
$15.00
CNC Machined Aluminum Bulkhead For DC1 Drag Chassis. Designed To Key Into The Chassis To Eliminate Slop, As Well As Being Lower And Narrower Than...
$55.00
This is the new DC1 motor mount lowering kit! This includes the new motor mount and transmission riser plate. In conjunction these will allow you...
$30.00
This is our new Tuned Wheelie Bar Brace that allows you to attach a support strut from the transmission to the wheelie bar. WARNING:...
$10.00
Injection Molded 50mm Body Posts. Included: 4 x 50mm Body Posts This will not be supplied with body clips.
$7.00
This is our wheelie bar turnbuckle for the DC1. This set comes with 1 pair of ball cup connectors.
$9.95
Our DC1 D-Block Was Designed To Take The Slop Out Of The Rear Arms. Using A Set Screw You Can Tighten Down On The Pills,...
$19.99
Sold As A Pair Of Two (Delrin Posts, Aluminum Base). These Are Our Black Anodized 14mm Tall Bases. Set Screws & Pins Will Be Included....
$16.00
These are the new injection molded steering knuckles. They are sold as a pair, a left & a right.
$7.00
Battery Mount For DC1 Drag Conversion. Comes With Bands And Tie Down Hook. This Is Now The Updated Larger Tray To Fit Our 15200Mah Battery....
$15.00
Black Anodized Aluminum Standoffs. This Set Of Eight Standoffs Is Used In Combination With The Carbon Riser Plate To Offset The Rear End Of The...
$14.99
DC1 Front Bumper 6mm Thickness Injection Molded OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR RACES, NATIONALS, REEDY RACES, DRAG RACES: (KOTS - KING OF THE...
$10.00
$30.00
These hold together the centering bracket for both the front and rear to their respective shock towers. These are titanium, nitrite coated. *Requires new slotted...
$15.00
This shim kit is for the DC1. It includes all shims needed for the front and rear axles as well as the transmission.
$7.00
This is our New Lay-down Transmission for our DC1! This transmission is made in house here at R1Wurks HQ. Machined out from 70/75 Aluminum. This...
$140.00
These are our new super limited carbon fiber front bumpers for our DC1. This bumper is available in 3 different thicknesses, 2mm, 3mm, and 4mm....
$35.00
This is our new Tuned Wheelie Bar for our DC1. It's shorter and lighter than the original wheelie bar. Measuring 239mm long and 56 grams....
$36.00
CNC Aluminum C-Block Designed For The DC1 Stand Up Transmission Case. This C-Block Will Accept AE Pills. This C-Block Was Designed For Our Transmission Case,...
$19.99
These are the rear hubs for the DC1. This set includes 2 pairs on the inserts. 1 pair of the A,C insert and 1 pair...
$10.00
This is our new DC1 Tuned Chassis. This carbon fiber chassis is 4mm thick and has strategically placed cutouts providing lightness without sacrificing rigidity.
$150.00
This 4mm Carbon fiber motor mount is for those who are using the AE Lay-down transmission in their drag cars. WARNING: This product contains a...
$18.00
$20.00
A Pair Of Small Stackable Brass Weights Designed To Fit On Any Of Our DC1 Bumpers. This Pair of Weights Will Add just over 18 Grams...
$8.00
DC1 V2 Shock Kit is for the DC1 Drag Car This is a more cost effective Shock kit compared to our V1 Shock kit. This...
$60.00
CNC Machined Out Of 7075-T6 Aluminum And Anodized Black. Along With The Two Case Halves, A New Aluminum C-Block , And Carbon Motor Mount Will...
$59.99
This is the differential seals that we use for our DC1 car.
$9.00
DC1 Injection Molded Front Shock Tower. Used with V1 or V2 Short Shocks. OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR RACES, NATIONALS, REEDY RACES, DRAG...
$15.00
$20.00
These are the kit outdrives for the DC1. Sold as a pair. Pins included
$14.00
This is a complete set of Hex Nuts for the DC1. Nuts are also compatible with all associated platforms. There are 17 total nuts in...
$22.99
DC1 Black Aluminum Rear Camber Link Mount. This works with the DC1 Standup Transmission and the B6.3 Laydown/ Layback case.
$20.00
$25.00
This is the gear diff rebuild kit that we use for our DC1 car.
$21.99
This is the front shock tower for our DC1 Drag Car. This also includes the Titanium standoff.
$32.99
DC1 Titanium Nitride Coated Titanium Ball Stud Set for Drag Car Sold as a complete set (2x 4mm)(4x 6mm)(4x 8mm)(2x 10mm) Compatible with Associated B6...
$56.99
This is our new injection molded front centering bracket for the DC1.
$5.00
DC1 Standup Aluminum Top Shaft. This Aluminum top shaft fits the DC1 Standup Transmission
$16.00
$20.00
Aluminum Bulkhead For DC1 Drag Chassis. Designed To Key Into The Chassis To Eliminate Slop, As Well As Being Lower And Narrower Than The B6.3.
$30.00
$45.00
DC1 Titanium Nitride Coated Outer Rear Hinge Pins for Drag Car. Compatible with Associated B6 platforms. Sold as a pair. SKU: 990058 OUR PRODUCTS ARE VERY COMPETITIVE WITH...
$12.99
Our new tuned front bulkhead for our DC1!This bulkhead has been machined out here at our HQ in order to save weight while maintaining rigidity!...
$40.00
This 0.1mm shim kit is for our DC1 Drag Car. It comes in a set of 10 and can be used anywhere on the chassis...
$5.00
These are the hat spacers used on the DC1. They are 1.7mm Sold as a set of 4.
$5.00
Replacement Bands And Hook For Our Battery Mount. You Will Receive Two Bands And One Hook. OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR RACES, NATIONALS,...
$1.29
This is the ball stud kit for our wheelie bar turnbuckle and bracket mount. There are 4mm threaded and non threaded ball studs included. Sold...
$5.00
DC1 Stand-Up Idler Gear. This gear fits the DC1 Standup Transmission.
$15.00
$20.00
DC1 Titanium Nitride Coated Titanium 4mm Ball Stud Pair for Drag Car Sold as a pair Compatible with Associated B6 platforms SKU: 990070 OUR PRODUCTS ARE VERY...
$9.49
This is our newest bumper for our DC1 car. This is the injection molded bumper but we have made cut outs to reduce weight. This...
$16.00
DC1 V1 Damper Kit. These shocks are perfect for our DC1 prototype, there are 6 different spring rates to fine tune your suspension setup. Springs...
$150.00
DC1 Titanium Nitride Coated Titanium 6mm Ball Stud Pair for Drag Car Sold as a pair Compatible with Associated B6 platforms SKU: 99069 OUR PRODUCTS ARE VERY...
$9.49
DC1 Titanium Nitride Coated Titanium 8mm Ball Stud Pair for Drag Car Sold as a pair Compatible with Associated B6 platforms SKU: 990068 OUR PRODUCTS ARE VERY...
$9.49
DC1 Titanium Nitride Coated Titanium 10mm Ball Stud Pair for Drag Car Sold as a pair Compatible with Associated B6 platforms SKU: 990067 OUR PRODUCTS ARE VERY...
$9.49
This is our new DC1 Tuned Chassis. This carbon fiber chassis is thinner and lighter than our previous chassis at 3mm thick and near 50...
$150.00
This is an upgrade screw kit for the DC1. A complete titanium set! *Includes custom shoulder screw/ hinge pin bolt for the floating body mount*...
$215.00
These Titanium Hinge Pins are a Hop-Up to the Associated B6.3 These are sold as a pair. SKU: 990060 OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR...
$9.00
These Titanium Hinge Pins are a Hop Up to the Associated B6.3 Sold as a Pair SKU: 990061 OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR RACES,...
$9.00
These are the insert for the DC1 Rear Hubs. These are the A,C offset inserts. Sold as a pair.
$5.00
R1 Aluminum Rear Tower Spacer used on all DC1 Kits.
$20.00
This is the standard screw set for the DC1 that comes with the kit. These screws are steel.
$70.00
This is an upgrade screw kit for the DC1. A complete titanium set! *Includes custom shoulder screw/ hinge pin bolt for the floating body mount*...
$215.00
These are the rear hub inserts for the DC1. These are the B Offset inserts. Sold as a pair.
$5.00
These Titanium hinge pins are a Hop-Up to the Associated B6.3 These are sold as a pair. SKU: 990059 OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES:...
$9.00
This is a direct replacement for the wheelie bar wheel that comes with the kit. This item is sold individually.
$10.00
These are replacement pistons for our V1 shocks. Includes a full set of 4. 2 and 3 hole pistons.
$6.00
This is the new DC1 motor mount only. Used with motor mount lowering kit: 990252 for laydown transmission
$15.00