DC1 Front Suspension
DC1 Direct Mount C-Hub. This C-Hub allows you to run your body mounts directly on the C-Hub knuckle. Available with or without Body Posts and...
$15.00
Here We Have Six Options In Spring Rate To Match The Version 1 Short Dampers Included In The Body Mount Kit and in the V1...
$4.25
These are new springs for the DC1 V2 shock kit. We currently have 6 spring rates available, 3lb, 4lb, 5lb, 6lb, 7lb, & 8lb. These...
$4.25
This is our flagship product, the DC1 Drag Car is a top of the line race car! This kit has been tested and proven on...
$650.00
The Black Anodized Aluminum Front Axle set is light weight which offers less rotating mass for your DC1. This allows for a more efficient drivetrain!...
$11.99
$12.99
These are the new injection molded steering knuckles. They are sold as a pair, a left & a right.
$7.00
CNC Machined Aluminum Bulkhead For DC1 Drag Chassis. Designed To Key Into The Chassis To Eliminate Slop, As Well As Being Lower And Narrower Than...
$50.00
DC1 Carbon Fiber Cross Bar full Assembly. This is available in our lightweight variants or our standard 4mm version. All Hardware is included in this...
$50.00
Here We Have Spare / Replacement Injection Molded Shock Ends And Inserts. These Will Work For Either V1 Or V2 Shocks. OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE...
$7.50
These are new injection molded R1 Front Suspension arms for the DC1 drag car.
$11.00
Our New DC1 Slotted Carbon Fiber Front Shock Tower. These Are For Use With Short Dampers. For Use With The DC1 Aluminum Bulkhead: This Shock...
$19.99
These hold together the centering bracket for both the front and rear to their respective shock towers. These are titanium, nitrite coated. *Requires new slotted...
$15.00
These are the new tuned front arms for our DC1. We have machined out pockets in the arms to reduce weight but maintain rigidity. Each...
$16.00
DC1 V2 Shock Kit is for the DC1 Drag Car This is a more cost effective Shock kit compared to our V1 Shock kit. This...
$60.00
These are the kit hinge pins for our DC1. This full set are made of steel.
$10.00
A Set Of Six Titanium Turnbuckle Links. The Set Includes Two 58mm (Front Steering), and Four 50mm (Front and Rear Camber) Links. The Threads Are...
$37.99
This is an upgrade from the standard hinge pins for the B6.3 All Pins are titanium and the rear outside pins are titanium nitride coated...
$40.00
Our new tuned front bulkhead for our DC1!This bulkhead has been machined out here at our HQ in order to save weight while maintaining rigidity!...
$40.00
These are the hat spacers used on the DC1. They are 1.7mm Sold as a set of 4.
$5.00
DC1 Injection Molded Front Shock Tower. Used with V1 or V2 Short Shocks. OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR RACES, NATIONALS, REEDY RACES, DRAG...
$15.00
$20.00
This 0.1mm shim kit is for our DC1 Drag Car. It comes in a set of 10 and can be used anywhere on the chassis...
$5.00
Aluminum Bulkhead For DC1 Drag Chassis. Designed To Key Into The Chassis To Eliminate Slop, As Well As Being Lower And Narrower Than The B6.3.
$30.00
$45.00
DC1 V1 Damper Kit. These shocks are perfect for our DC1 prototype, there are 6 different spring rates to fine tune your suspension setup. Springs...
$150.00
These are new short springs for the DC1. They are sold as a pair and are available in 8lb. These are for the V1 shocks....
$5.00
This is an upgrade screw kit for the DC1. A complete titanium set! *Includes custom shoulder screw/ hinge pin bolt for the floating body mount*...
$185.00
These Titanium Hinge Pins are a Hop Up to the Associated B6.3 Sold as a Pair SKU: 990061 OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES: ROAR/EFRA/IFMAR RACES,...
$9.00
DC1 Lightweight Front Shock Tower. These are a lighter version of our current front shocktower.
$25.00
Rebuild kit for DC1 V1 Dampers. This kit includes bladders, o-rings and shock cap o-rings.
$15.00
This is a set of the red springs for our V2 shocks. Sold in a set of 4
$8.00
DC1 Lightweight Front Carbon Crossbar. This is a Lightweight version of our current front carbon fiber crossbar. Available in 2,3,4mm Variants
$25.00
This is an upgrade screw kit for the DC1. A complete titanium set! *Includes custom shoulder screw/ hinge pin bolt for the floating body mount*...
$215.00
These are springs for the V2 shocks. These are sold in a set of 4
$8.00
These Titanium hinge pins are a Hop-Up to the Associated B6.3 These are sold as a pair. SKU: 990059 OUR PRODUCTS ARE VERY COMPETITIVE WITH THESE RACES:...
$9.00
Replacement Titanium Turnbuckle pairs. Coming in either 50mm or 58mm Length.
$13.00
These are a set of springs for the V2 shocks. Sold as a set of 4
$8.00