Products

"Mega" T-shirt Large Tri-blend, Pre-Shrunk Item: 090040

"Mega" T-shirt M Tri-blend, Pre-Shrunk Item: 090039

"Mega" T-Shirt XLarge Tri-blend, Pre-Shrunk item: 090041

"Mega" T-Shirt XXLarge(2XL) Tri-blend, Pre-Shrunk item: 090042

"Mega" T-Shirt XXXLarge (3XL) Tri-blend, Pre-Shrunk item: 090043

"Motorlab" T-Shirt Large Item #090028

"Motorlab" T-Shirt Medium Item #090027

"Motorlab" T-Shirt Small Item #090026

"Motorlab" T-Shirt XXL Tri-blend, Pre-Shrunk Item #090030

"Motorlab" T-Shirt XXXL Item #090031

"Motorlab" T-Shirt XL Item #090029

"R1 Digital 3" T-Shirt Large  Item #090016

"R1 Digital 3" T-Shirt Medium Item #090009

"R1 Digital 3" T-Shirt Small  Item #090014

"R1 Digital 3" T-Shirt XL Item #090017

"R1 Digital 3" T-Shirt XXL Item #090018

"R1 Digital 3" T-Shirt XXXL  Item #090019

"R1 Digital 3" T-Shirt Large  Item #090010

"R1 Digital 3" T-Shirt Medium Item #090009

"R1 Digital 3" T-Shirt Small  Item #090008 

"R1 Digital 3" T-Shirt XL Item #090011

"R1 Digital 3" T-Shirt XXL Item #090012

"R1 Digital 3" T-Shirt XXXL  Item #090013

"Racing Stripe" T-Shirt Large Item #090034

"Racing Stripe" T-Shirt Medium Item #090033

"Racing Stripe" T-Shirt Small Item #090032

"Racing Stripe" T-Shirt XL Item #090035

"Racing Stripe" T-Shirt XXL Item #090036

"Racing Stripe" T-Shirt XXXL Item #090037

OUTPUT: 12V/ 750w 62.5  Carbon print vinyl wrapped ITEM# 080001 WARNING: This product can expose you to chemicals including lead and lead compounds, which is...

R1 WURKS 21.5T MOTOR W/ ALIGNED SENSOR BOARDV21 ITEM# 020011-1 These motors have aligned sensor boards within 2 degrees from each pole or better using a motolyzer....

ITEM# 020059 Replacement sensor board for all R1 motors (V21 25.5) WARNING: This product can expose you to chemicals including lead and lead compounds, which is...

R1 WURKS 5300mAh 120C 7.4v  030024 2S GRAPHENE SLIM BATTERY  ITEM# 030024  WEIGHT: 248 GRAMS 139mm (L), 38mm(W), 25.25mm (thickness) -LOW INTERNAL RESISTANCE  -HIGH DISCHARGE RATE-ENHANCED PUNCH-MAXIMUM TOP...

PENDING ROAR APPROVAL. ITEM# 030006-4 WEIGHT: 227 GRAMS TECHNOLOGY: ULTRA LOW IR TECHNOLOGYHIGH DISCHARGE RATEENHANCED PUNCH/TOP SPEED PERFECT FOR SPEC RACING  WARNING: This product can expose you to chemicals...

R1 WURKS 6000mAh 120C 7.4v 040003 2S GRAPHENE BATTERY  ROAR APPROVED! ITEM# 030007-2 WEIGHT: 284 GRAMS Low IR (Internal resistance)High discharge rate Enhanced punchMaximum top speed...

R1 WURKS 6200mAh 120C 7.6  030016 2S GRAPHENE SHORTY BATTERY  ITEM# 030016 Introducing the all new R1 Wurks 6200 mAh high voltage shorty pack with...

Item #100001 WARNING: This product can expose you to chemicals including lead and lead compounds, which is known to the State of California to cause...

Replacement DC1 Front Tower And Front Centering Bracket. These Are For Use With Short Dampers. The Centering Screw Assembly Will Be Included. Please Choose Carefully...

Black Anodized Aluminum Standoffs. This Set Of Eight Standoffs Is Used In Combination With The Carbon Riser Plate To Offset The Rear End Of The...

CNC Machined Aluminum Bulkhead For DC1 Drag Chassis. Designed To Key Into The Chassis To Eliminate Slop, As Well As Being Lower And Narrower Than...

CNC Aluminum C-Block Designed For The DC1 Stand Up Transmission Case. This C-Block Will Accept AE Pills. This C-Block Was Designed For Our Transmission Case,...

Our DC1 D-Block Was Designed To Take The Slop Out Of The Rear Arms. Using A Set Screw You Can Tighten Down On The Pills,...

Aluminum Side Pods That Attach To The Chassis Allowing The Placement Of The ESC And Capacitor As Close To The Rear As Possible.

CNC Machined Out Of 7075-T6 Aluminum And Anodized Black. Along With The Two Case Halves, A New Aluminum C-Block ,Wheelie Bar Brace And Carbon Motor...

7075-T6 Black Anodized Aluminum Front Steering Knuckle Pair For R1 DC1

Battery Mount For DC1 Drag Conversion. Comes With Bands And Tie Down Hook.

Replacement Bands And Hook For Our Battery Mount. You Will Receive Two Bands And One Hook.

Carbon Fiber Chassis Used In Our DC1 Drag Car Kit.

Upgrade To Our New DC1 Carbon Fiber Front Shock Tower. These Are For Use With Short Dampers. The Centering Bracket And Screw Assembly Will Be...

Riser Plate For The Rear Suspension And Transmission. This Plate Allows For Offsetting The Rear End Of The Drag Car To Achieve A More Desirable...

Delrin Body Post Pair. We Have Two Options To Choose From, 50mm Or 150mm. The 150mm Option Is Designed To Fit In The Center Of The Chassis...

These Parts Will Allow You To Attach Our Directed Force Body Mount Kit To The Standard B6 Tall Shock Towers. Two Pieces Are For The...

Sold As A Pair Of Two (Delrin Posts, Aluminum Base). Choose Between Two Options, 7mm Short Bases Or 14mm Tall Bases. Screws And Pins Will...

Two Pair (Two Left, Two Right) of Our SLS 3D Printed C-Hubs To Be Used With The Directed Force Body Mount. Choose Between Zero, Two, and...

Includes One Set Of (Left and Right) DC1 Directed Force C-Hubs With Four Degrees Of Caster. This Also Includes Two Sets Of The DC1 Front Knuckles....

A Pair Of Rear Hub Adapters. These Will Bolt Onto B6.3 Rear Hubs Using Longer Screws And Hex Nuts. They Are Not Specific To Left Or...

3D Printed Front Body Mount Cross Bar

Stackable Brass Weights Designed To Fit On Any Of Our DC1 Bumpers. Weighing In Just Shy Of 34 Grams, These CNC Machined Brass Pieces Will Add More Weight...

A Pair Of Small Stackable Brass Weights Designed To Fit On Any Of Our DC1 Bumpers. This Pair of Weights Will Add 18 Grams To The...

You Will Receive A Pair (Two Parts) Of Our SLS 3D Printed Centering Brackets For The Front Shock Tower. The Screw Assembly Will Be Included...

Two Pairs Of 28mm Risers That Connect The Front Cross Bar To The C-Hubs. The Set Is A Total Of Four Pieces And All Pieces...

Optional DC1 Heavy Front Bumper, Strongest.

Optional DC1 Medium Thickness Front Bumper

Carbon Fiber Motor Mount For The DC1 Stand Up Transmission. NOTICE:  This Motor Mount Is Designed For The R1 Transmission Case And Has Not Been...

DC1 Prototype Drag Racing Conversion Kit We Would like to introduce the DC1 B6.3 conversion. This is a prototype of our upcoming Chassis that has...

This Is The Centering Bracket For The Rear Body Mount. It Prevents Side To Side Movement Of The Crossbar And Body Posts. It Consists Of...

3D Printed Rear Body Mount Cross Bar

One Pair Of Risers That Connect The Rear Cross Bar To The Rear Hub Adapter. The Set Is A Total Of Two Pieces And Both Pieces Are...

Includes The Rear Shock Tower, Designed For Use With Short Shocks, And The Two Pieces That Make Up The Centering Bracket. There Are A Total...

Replacement DC1 Stock Servo Horn And Horn Adapter.

Flip Front Servo Mount For DC1 Drag Conversions.

Here We Have Six Options In Spring Rate To Match The Short Dampers Included In The Body Mount Kit. They Will Be Sold In Pairs...

DC1 Stock Replacement Front Bumper.

A Set Of Six Titanium Turnbuckle Links. The Set Includes Two 58mm (Front Steering), and Four 50mm (Front and Rear Camber) Links. The Threads Are...

Wheelie Bar Mount For DC1 Conversion. Ready To Mount Up A Wheelie Bar With Damper.

We Have Two Options For The Wheelie Bar Mount. Option One Is Designed To Fit B6 Transmission Cases. Option Two Is Designed For Our DC1...

Item # 12550001 R1-125-50-001 Rotor Dimensions: 12.5 x 5.0 x 24.2 mm

Item # 13050242 R1-130-50-242 Rotor  Dimensions: 13.0 x 5.0 x 24.2 mm

item # 14050242 R1-140-50-242 Rotor Dimensions: 14.0 x 5.0 x 24.2 mm These rotors are rated for a maximum of 50 hits, this is not...

High performance racing tires for 1/10 sedan asphalt by Elexis Racing Tires This compound is designed to be used in high temperatures on high speed...

item #125720003 R1-125-720-003 Rotor

040017

Drag Racing Tuned Rotor, This rotor is used to tune overall power. Click on the link below for other Perfect Tune Rotors. 13.3mm = High...

Drag Racing Tuned Rotor, This rotor is used to tune overall power. Click on the link below for other Perfect Tune Rotors. 13.3mm = High...

Drag Racing Tuned Rotor, This rotor is used to tune overall power. Click on the link below for other Perfect Tune Rotors. 13.3mm = High...

THIS IS A BODY MOUNT ONLY,THIS IS NOT A COMPLETE CAR. DC1 Prototype Directed Force Body Mount  We Would like to introduce the DC1 B6/.1/.2/.3...

THIS IS A BODY MOUNT ONLY,THIS IS NOT A COMPLETE CAR. DC1 Prototype Directed Force Body Mount (short damper included) We Would like to introduce...

ITEM# 020143-1 This shim set is designed for the R1 V21-S motor and all associated rotors. Includes 10pcs T=0.3 5x3.25 Shims, (0.4mm) shims if addition shimming...

ITEM# 040013 New from R1 Motor lab is the LCG Digital-3 Super Stock Wireless* programmable brushless speed controller. Developed using the most advanced MICROCHIP processor and...

Item #FBM Arrive to the track or lounge around in style and still stay comfortable with this R1 Wurks T-Shirt.  Features: R1 Wurks logo in...

R1 - 215-125-V16-AU

R1 WURKS 10,000mah 130c 7.6v 2S GRAPHENE BATTERY ITEM# 030023 ROAR APPROVAL PENDING WEIGHT: 330 GRAMS TECHNOLOGY: LOWEST IR IN THE INDUSTRY HIGH DISCHARGE RATE...

R1 WURKS 10.5T MOTOR V21   ITEM# 020048 ***Note: If you are ordering outside of the U.S. or Canada we recommend purchasing our motors through your local...

R1 WURKS 10.5T REPLACEMENT STATORV21   ITEM# 020126 ***Note: If you are ordering outside of the U.S. or Canada we recommend purchasing our motors through your...

ITEM# 020021     Upgraded 540 motor endbell bearings with 10X Double Ceramic coating & Si3N4 Balls .  Double Ceramic (ceramic coated) 540 Motor Bearing...

Item #1251 12.5 R1 Rotor

R1 WURKS 13.5T MOTOR V21 S ITEM# 020076 ROAR APPROVED APPLICATION:  OFFROAD BUGGY, TRUCK, 4WD & SHORT COURSE TRUCKTC BLINKY (OUTDOOR & INDOOR) 1/12 1S BLINKY OVAL 1S BLINKY OVAL 1S...

This motor is a type 2 of our outlaw 13.5T motor. This is the expensive way of  building an outlaw motor. This motor cost twice as much...

R1 WURKS 13.5T MOTOR W/ ALIGNED SENSOR BOARDV21  ITEM# 020009-1 These motors have aligned sensor boards within 2 degrees from each pole or better using a...

These motors have aligned sensor boards within 2 degrees from each pole or better using a motolyzer. These are guaranteed to be aligned using our...

R1 WURKS 13.5T MOTOR W/ ALIGNED SENSOR BOARDV21-S ITEM# 020076-1 These motors have aligned sensor boards within 2 degrees from each pole or better using a...

Why hand picked stators? Lowest resistance stators is at the pinnacle of all types of motor tunning, low resistance delivers the highest possible performace gain out...

REPLACEMENT STATOR for 13.5 V21-S *This is not a complete motor ITEM# 020127 WARNING: This product can expose you to chemicals including lead and lead...

ITEM# 125704-1 Advantages:  APPROXIMATELY 1650 GAUSS READING ENHANCED PUNCH *TEMPERATURES EXCEEDING 170°F WILL RESULT IN A LOSS OF ROTOR STRENGTH * Rotor strength varies in each rotor...

This is a pre order, we will ship your order in the order that we receive them.  We are providing you an estimated date from...

R1 WURKS 17.5T MOTOR V21 S ITEM# 020077 ROAR APPROVED APPLICATION:  1/10 scale model RC car  OFFROAD BUGGY, TRUCK, 4WD & SHORT COURSE TRUCKTC BLINKY (OUTDOOR & INDOOR) 1/12...