R1WURKS Premium Titanium T7 Upper Screw Kit

This 76 -piece set replaces the upper steel screws with lightweight, ultra-high quality Grade 5 (6Al-4V) Titanium screws. Not only will this set lower the CG of your vehicle with a weight reduction, but you’ll also benefit from increased hex durability of the precision-broached 2.5 hex socket button head screw, allowing you to torque the screws without the worry of stripping out the hex. 

Features and Specifications:

• In-House Ultra-High Precision Swiss Machining
• High-strength grade 5 (Ti-6Al-4V) titanium
• Tight tolerance hex broaching 
• Cold-formed threads. Unlike traditional cut threads, which disrupt the material’s natural grain structure, cold-formed threads are rolled into shape, refining the metal’s grain flow for a stronger, more uniform structure.
• Titanium Lower Shock Mounts included
• 2.5mm hex provides higher torque capacity and greatly reduces the risk of stripping
• Lightweight head design 
• Reduced center of gravity 
  

Color Options:

• Silver (Natural Titanium)
  
• Blue
• Bronze

Kit Includes: 

(Please refer to the manufacturer's manual for details on where each screw is used, with corresponding page numbers and steps provided below)

10mm CS (4pcs)

x2 Bag 2 Step 8 / Front Shock tower
x2 Bag 6 Step 2 / Sway Bar Mount

12mm CS (3pcs)

x3 Bag 6 Step 4 / Motor Mount

6mm BH (7pcs)

x1 Bag 2 Step 3 / Servo Horn
x4 Bag 2 Step 4 / Servo Mount
x2 Bag 3 Step 1 / Front Axle

8mm BH (10pcs)

x8 Bag 3 Step 2 / Front KPI Assembly
x2 Bag 6 Step 1 / Transmission

10mm BH (4pcs)

x4 Bag 10 Step 3 / Battery Mount

12mm BH (15pcs)

x2 Bag 1 Step 2 / Steering Rack
 x7 Bag 6 Step 6 / Body mount / Shock tower to Transmission
x4 Bag 7 Step 1 / Rear Hub Link
x2 Bag 10 Step 3 / Battery Mount (LP Battery)

14mm BH (2pcs)

x2 Bag 3 Step 3 / Front KPI

16mm BH (15pcs)

x2 Bag 1 Step 3 / Bellcranks
x3 Bag 2 Step 5 / Top Plate
x2 Bag 3 Step 3 / Front KPI
x3 Bag 6 Step 1 / Transmission
x4 Bag 6 Step 3 / Gearbox Top Cap
x1 Bag 6 Step 4 / Transmission

18mm BH (2pcs)

x2 Bag 10 Step 3 / Battery Mount (Standard Battery)

20mm BH (2pcs)

x2 Bag 2 Step 8 / Body Mount

22mm BH (2pcs)

x2 Bag 9 Step 7 / Front Lower Shock Mount

24mm BH (2pcs)

x2 Bag 6 Step 3 / Transmission

20mm LP (2pcs)

x2 Bag 2 Step 7 / Front Shock tower

22mm LP (2pcs)

x2 Bag 6 Step 5 / Rear Shock tower

FL 8 (2pcs)

x2 Bag 10 Step 1 / Motor Screws

LSM (2pcs)

x2 Bag 4 Step 1 / Rear Shock Mount

Lower Shock Mount Instructions: For easier installation of the shock mounts, pre-thread the arm mounting holes using a steel screw. For harder materials like carbon-filled nylon, it's recommended to pre-thread the holes and apply grease to the threads for easier assembly.

Note: These shock mounts feature both left-hand and right-hand threads. Use a counterclockwise rotation for installation.

DISCLAIMER: All trademarks, product names, and company names or logos mentioned are the property of their respective owners. The use of these trademarks, names, or logos is for identification and compatibility purposes only and does not imply any affiliation or endorsement by the trademark holders.