R1WURKS (Fits Stage D10) Steering Stop, Titanium
These ultra-lightweight steering stops prevent over-center lockup with a smooth contact surface that won’t interfere with suspension movement.
Key Features and Specifications:
- In-house ultra-high precision swiss machining
- High-strength grade 5 (Ti-6Al-4V) titanium
- Tight tolerance hex broaching
- Color options available
- Cold-formed threads for improved grain structure and increased material hardness
Installation:
Insert a 1.5mm hex driver through the desired knuckle hole. Attach the steering stop to the hex tool, then push the stop into the hole and tighten it until snug. Do not overtighten.
Note: Depending on which knuckle hole is used, the position providing the maximum steering angle may require front wheels with additional offset (6mm) and/or wheel spacers to provide adequate clearance and prevent the wheel from rubbing against the stop. Check clearance and adjust the wheel offset or spacer thickness as needed.
R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts designed to be compatible with radio-controlled vehicles, including models commonly referred to as “HPI Racing” models, originally manufactured or distributed by HPI Racing A/S Limited.
We are not affiliated with, sponsored by, or endorsed by HPI Racing A/S Limited. None of our products are manufactured by or in collaboration with HPI Racing A/S Limited.
All references to “HPI Racing,” specific model names, model numbers, and other product designations are used strictly for compatibility and identification purposes.
HPI Racing® and related trademarks are trademarks of HPI Racing A/S Limited and/or their respective owners. All other trademarks are the property of their respective owners.
R1WURKS (Fits Stage D10) Steering Stop, Titanium
These ultra-lightweight steering stops prevent over-center lockup with a smooth contact surface that won’t interfere with suspension movement.
Key Features and Specifications:
- In-house ultra-high precision swiss machining
- High-strength grade 5 (Ti-6Al-4V) titanium
- Tight tolerance hex broaching
- Color options available
- Cold-formed threads for improved grain structure and increased material hardness
Installation:
Insert a 1.5mm hex driver through the desired knuckle hole. Attach the steering stop to the hex tool, then push the stop into the hole and tighten it until snug. Do not overtighten.
Note: Depending on which knuckle hole is used, the position providing the maximum steering angle may require front wheels with additional offset (6mm) and/or wheel spacers to provide adequate clearance and prevent the wheel from rubbing against the stop. Check clearance and adjust the wheel offset or spacer thickness as needed.
R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts designed to be compatible with radio-controlled vehicles, including models commonly referred to as “HPI Racing” models, originally manufactured or distributed by HPI Racing A/S Limited.
We are not affiliated with, sponsored by, or endorsed by HPI Racing A/S Limited. None of our products are manufactured by or in collaboration with HPI Racing A/S Limited.
All references to “HPI Racing,” specific model names, model numbers, and other product designations are used strictly for compatibility and identification purposes.
HPI Racing® and related trademarks are trademarks of HPI Racing A/S Limited and/or their respective owners. All other trademarks are the property of their respective owners.