R1WURKS (B84 Series) Titanium Upper Screw Set

This 82-piece set replaces the upper steel screws with lightweight, ultra-high quality Grade 5 (6Al-4V) Titanium screws. Not only will this set lower the CG of your vehicle, but you’ll also benefit from increased hex durability of the precision-broached 2.5 hex socket button head screw, allowing you to torque the screws without the worry of stripping out the hex. 

Features and Specifications:

• In-house ultra-high precision Swiss machining
• High-strength Grade 5 (Ti-6Al-4V) titanium
• Tight-tolerance hex broaching
• Cold-formed threads – unlike traditional cut threads, which disrupt the material’s natural grain structure, cold-formed threads are rolled into shape, refining the metal’s grain flow for a stronger, more uniform structure
• Titanium lower shock mounts included
• Flanged and LP large-format head screws included for use in key areas
• 2.5mm hex provides higher torque capacity and greatly reduces the risk of stripping
• Lightweight head designs
• Reduced center of gravity
• Approximately 40% lighter than kit steel hardware
  

Color Options:

• Silver (Natural Titanium)
  

Where used: 

(Please refer to the manufacturer's manual for details on where each screw is used, with corresponding page numbers and steps provided below)

M3x6mm Button Head Screws
Qty: 1            x1 Servo Horn (Page 6, Step 4)

M3x8mm Button Head Screws
Qty: 10          x2 Upper Center Plate (Page 16, Step 3)
      x2 Front Upper Brace (Page 10, Step 5)
      x4 Steering Block Arm (Page 13, Step 1)
      x2 Rear Battery Mount (Page 21, Step 4)

M3x10mm Button Head Screws
Qty: 2            x2 Fan Center Fan Mount (Page 20, Step 2)

M3x12mm Button Head Screws
Qty: 30          x2 Steering Rack (Page 6, Step 6)
      x4 Front Gearbox Upper (Page 9, Step 4)
      x4 Rear Gearbox Upper (Page 11, Step 9)
      x2 Rear Upper Brace (Page 11, Step 10)
      x3 Front Shock Tower (Page 12, Step 2)
      x7 Rear Shock Tower & Wing Mount (Page 12, Step 4)
      x4 Steering Blocks (Page 13, Step 1)
      x4 Rear Hub Link Mount (Page 14, Step 1)

M3x14mm Button Head Screws
Qty: 8         x2 Lower Front Shock Mount (Page 19, Step 7)
     x4 Fan Mounting (Page 20, Step 1)
     x2 LP Battery Latch Option (Page 21, Step 4)

M3x16mm Button Head Screws
Qty: 1        x1 Fan Mount Side (Page 20, Step 2)

M3x20mm Button Head Screws
Qty: 6         x2 Arm Mount A (Page 8, Step 1)
     x2 Arm Mount D (Page 10, Step 6)
     x2 Battery Latch (Page 21, Step 2)

M3x22mm Button Head Screws
Qty: 2         x2 Shock Mount (Page 12, Step 3)

M3x24mm Button Head Screws
Qty: 4         x1 Center Front Brace (Page 5, Step 2)
     x1 Center Rear Brace (Page 5, Step 3)
     x2 Front Shock Mounts (Page 11, Step 1)

M3x12mm Countersunk Screws (Flat)
Qty: 4         x2 Motor Mount (Page 20, Step 2)
     x2 Rear Wing Flange (Page 22, Step 7)

M3x6mm (Flanged)
Qty: 4         x3 Servo Mount (Page 6, Step 4)
     x1 Front Upper Brace (Page 10, Step 5)

M3x10mm (Flanged)
Qty: 2         x2 Motor Mount (Page 20, Step 3)

Lower Shock Mount Screw
Qty: 2         x2 Lower Rear Arm Shock Mounts (Page 7, Step 3)

M3x10mm (LP)
Qty: 2         x2 Center Rear Brace (Page 5, Step 3)

M3x8mm (LP Button Head)
Qty: 4         x4 Spur Gear (Page 16, Step 3)

Lower Shock Mount Instructions: For easier installation of the shock mounts, pre-thread the arm mounting holes using a steel screw. For harder materials like carbon-filled nylon, it's recommended to pre-thread the holes and apply grease to the threads for easier assembly.

Note: These shock mounts feature both left-hand and right-hand threads. Use a counterclockwise rotation for installation.

Disclaimer:

R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts designed to be compatible with radio-controlled vehicles, including models commonly referred to as “B7,” originally manufactured by Associated Electrics, Inc. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. None of our products are manufactured by or in collaboration with Associated Electrics, Inc. All references to “B7” and other model designations are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. All other trademarks are the property of their respective owners.