R1WURKS (B7 Series) Lowered Rear Tower Set, Inverted Rear Shocks
This configuration not only leverages the performance advantages of inverted shocks but also further reduces the center of gravity by repositioning the shock mounting point at the arm and integrating a lowered shock tower, all while maintaining standard shock travel.
Key Features and Specifications:
- Lowered carbon tower.
- Lightweight carbon tower spacer.
- Precision-machined aluminum shock mounting hardware with black anodized finish.
- High-strength grade 10.9 steel hardware.
- Shifts weight forward to enhance mass centralization, improving rotation and steering response.
Fits:
- B7
Includes:
- x2 Upper Shock Mount Spacer (13mm)
- x2 Black Aluminum Washer
- x2 Offset Lower Shock Mount
- x4 BHCS M3x10mm
- x6 BHCS M3x18mm
- x2 BHCS M3x25mm
- x2 BHCS M3x30mm
- x1 Carbon Spacer
- x1 Lowered Rear Shock Tower
Note:
- When using standard shock springs, utilize the three outermost holes on the shock tower. Additional mounting positions may be compatible when using tapered-style springs. Trimming of the gear guard may also be required at certain settings.
- If using rear side-mounted motor fan, it will need to be relocated to the center of the chassis in front of the motor.
Disclaimer:
R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts designed to be compatible with radio-controlled vehicles, including models commonly referred to as “B7,” originally manufactured by Associated Electrics, Inc.
We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. None of our products are manufactured by or in collaboration with Associated Electrics, Inc.
All references to “B7” and other model designations are used strictly for compatibility and identification purposes.
Associated Electrics® is a registered trademark of Associated Electrics, Inc. All other trademarks are the property of their respective owners.
R1WURKS (B7 Series) Lowered Rear Tower Set, Inverted Rear Shocks
This configuration not only leverages the performance advantages of inverted shocks but also further reduces the center of gravity by repositioning the shock mounting point at the arm and integrating a lowered shock tower, all while maintaining standard shock travel.
Key Features and Specifications:
- Lowered carbon tower.
- Lightweight carbon tower spacer.
- Precision-machined aluminum shock mounting hardware with black anodized finish.
- High-strength grade 10.9 steel hardware.
- Shifts weight forward to enhance mass centralization, improving rotation and steering response.
Fits:
- B7
Includes:
- x2 Upper Shock Mount Spacer (13mm)
- x2 Black Aluminum Washer
- x2 Offset Lower Shock Mount
- x4 BHCS M3x10mm
- x6 BHCS M3x18mm
- x2 BHCS M3x25mm
- x2 BHCS M3x30mm
- x1 Carbon Spacer
- x1 Lowered Rear Shock Tower
Note:
- When using standard shock springs, utilize the three outermost holes on the shock tower. Additional mounting positions may be compatible when using tapered-style springs. Trimming of the gear guard may also be required at certain settings.
- If using rear side-mounted motor fan, it will need to be relocated to the center of the chassis in front of the motor.
Disclaimer:
R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts designed to be compatible with radio-controlled vehicles, including models commonly referred to as “B7,” originally manufactured by Associated Electrics, Inc.
We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. None of our products are manufactured by or in collaboration with Associated Electrics, Inc.
All references to “B7” and other model designations are used strictly for compatibility and identification purposes.
Associated Electrics® is a registered trademark of Associated Electrics, Inc. All other trademarks are the property of their respective owners.