R1WURKS (22X-4) Titanium Upper Screw Set
This 86-piece set replaces the upper steel screws with lightweight, ultra-high quality Grade 5 (6Al-4V) Titanium screws. Not only will this set lower the CG of your vehicle, but you’ll also benefit from increased hex durability of the precision-broached 2.5 hex socket button head screw, allowing you to torque the screws without the worry of stripping out the hex.
Features and Specifications:
- In-house ultra-high precision Swiss machining
- High-strength Grade 5 (Ti-6Al-4V) titanium
- Tight-tolerance hex broaching
- Cold-formed threads – unlike traditional cut threads, which disrupt the material’s natural grain structure, cold-formed threads are rolled into shape, refining the metal’s grain flow for a stronger, more uniform structure
- Titanium lower shock mounts included
- Flanged and LP large-format head screws included for use in key areas
- 2.5mm hex provides higher torque capacity and greatly reduces the risk of stripping
- Lightweight head designs
- Reduced center of gravity
- Approximately 40% lighter than kit steel hardware
Color Options:
- Silver (Natural Titanium)
- Blue
- Bronze
Where used:
(Please refer to the manufacturer's manual for details on where each screw is used, with corresponding page numbers and steps provided below)
M3×6mm LPBH (4 pcs)
x4 Spur Gear – Page 12
M3×8mm BH (26 pcs)
x5 Center Chassis Stiffener – Page 17
x6 Center Diff Cover and Steering Arm – Page 18
x2 Steering Bellcranks – Page 19
x2 Front Sway Bar Holder – Page 23
x4 Spindle Arm – Page 24
x6 Rear Sway Bar Holder and Camber Link Mount – Page 30
x1 Wire Organizer – Page 38
M3×10mm BH (17 pcs)
x4 Diff Cover Front/Top – Page 21
x4 Front Shocktower – Page 22
x2 Rear Diff Cover – Page 28
x3 Rear Shocktower/Wing Mount – Page 29
x2 Fan Mount – Page 35
x2 Wing Mount – Page 39
M3×10mm LP (4 pcs)
x4 Servo Mount Top/Front – Page 33
M3×10mm FH (2 pcs)
x2 Motor Mount – Page 34
M3×12mm BH (10 pcs)
x4 Front Spindle – Page 24
x2 Front Lower Shock Mount – Page 26
x2 Motor Mount – Page 34
x2 Battery Mount – Page 36
M3×12mm FH (8 pcs)
x2 Pivot Block B – Page 21
x2 Pivot Block A – Page 22
x2 Pivot Block C – Page 28
x2 Rear Pivot Block D – Page 29
M3×14mm BH (4 pcs)
x2 Diff Cover Front/Top – Page 21
x2 Rear Shocktower/Wing Mount – Page 29
M3×16mm BH (2 pcs)
x2 Rear Diff Cover – Page 28
Disclaimer:
R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts designed to be compatible with radio-controlled vehicles, including models commonly referred to as “22X-4,” originally manufactured by Horizon Hobby Inc. We are not affiliated with, sponsored by, or endorsed by Horizon Hobby, Inc. None of our products are manufactured by or in collaboration with Horizon Hobby, Inc. All references to “22X-4” and other model designations are used strictly for compatibility and identification purposes. TLR® is a registered trademark of Horizon Hobby, Inc. All other trademarks are the property of their respective owners.
R1WURKS (22X-4) Titanium Upper Screw Set
This 86-piece set replaces the upper steel screws with lightweight, ultra-high quality Grade 5 (6Al-4V) Titanium screws. Not only will this set lower the CG of your vehicle, but you’ll also benefit from increased hex durability of the precision-broached 2.5 hex socket button head screw, allowing you to torque the screws without the worry of stripping out the hex.
Features and Specifications:
- In-house ultra-high precision Swiss machining
- High-strength Grade 5 (Ti-6Al-4V) titanium
- Tight-tolerance hex broaching
- Cold-formed threads – unlike traditional cut threads, which disrupt the material’s natural grain structure, cold-formed threads are rolled into shape, refining the metal’s grain flow for a stronger, more uniform structure
- Titanium lower shock mounts included
- Flanged and LP large-format head screws included for use in key areas
- 2.5mm hex provides higher torque capacity and greatly reduces the risk of stripping
- Lightweight head designs
- Reduced center of gravity
- Approximately 40% lighter than kit steel hardware
Color Options:
- Silver (Natural Titanium)
- Blue
- Bronze
Where used:
(Please refer to the manufacturer's manual for details on where each screw is used, with corresponding page numbers and steps provided below)
M3×6mm LPBH (4 pcs)
x4 Spur Gear – Page 12
M3×8mm BH (26 pcs)
x5 Center Chassis Stiffener – Page 17
x6 Center Diff Cover and Steering Arm – Page 18
x2 Steering Bellcranks – Page 19
x2 Front Sway Bar Holder – Page 23
x4 Spindle Arm – Page 24
x6 Rear Sway Bar Holder and Camber Link Mount – Page 30
x1 Wire Organizer – Page 38
M3×10mm BH (17 pcs)
x4 Diff Cover Front/Top – Page 21
x4 Front Shocktower – Page 22
x2 Rear Diff Cover – Page 28
x3 Rear Shocktower/Wing Mount – Page 29
x2 Fan Mount – Page 35
x2 Wing Mount – Page 39
M3×10mm LP (4 pcs)
x4 Servo Mount Top/Front – Page 33
M3×10mm FH (2 pcs)
x2 Motor Mount – Page 34
M3×12mm BH (10 pcs)
x4 Front Spindle – Page 24
x2 Front Lower Shock Mount – Page 26
x2 Motor Mount – Page 34
x2 Battery Mount – Page 36
M3×12mm FH (8 pcs)
x2 Pivot Block B – Page 21
x2 Pivot Block A – Page 22
x2 Pivot Block C – Page 28
x2 Rear Pivot Block D – Page 29
M3×14mm BH (4 pcs)
x2 Diff Cover Front/Top – Page 21
x2 Rear Shocktower/Wing Mount – Page 29
M3×16mm BH (2 pcs)
x2 Rear Diff Cover – Page 28
Disclaimer:
R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts designed to be compatible with radio-controlled vehicles, including models commonly referred to as “22X-4,” originally manufactured by Horizon Hobby Inc. We are not affiliated with, sponsored by, or endorsed by Horizon Hobby, Inc. None of our products are manufactured by or in collaboration with Horizon Hobby, Inc. All references to “22X-4” and other model designations are used strictly for compatibility and identification purposes. TLR® is a registered trademark of Horizon Hobby, Inc. All other trademarks are the property of their respective owners.